Solutions

  • Waterproofing
  • Cracks and Wall Coverings
  • Painting and Interior Decoration
  • Plaster
  • GRC - Glassfibre Reinforced Concrete
  • Pavements, Beton and Concrete
  • Marble and Ceramic
  • Safety Nets and Fences
  • ETICS - External Thermal Insulation Composite System
  • Foundation and Drainage

Solutions

We ensure an efficient response to market demands.

left arrow

Waterproofing

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Draining Products

VimaDreno / VimaTubo

VimaDreno is a high density polyethylene sheet (HDPE) for drainage with high resistance to pressure, traction and chemical agents. Its alveolar structure gives it an excellent drainage and protection capacity to walls and buried structures, guaranteeing the drainage of the terrain and controlling the condensation. The drainage sheets can be supplied with and without geotextile depending on the filtration and/or separation requirements. It is also available in different sizes to meet the requests of each situation. It is advisable to place a manifold pipe - like our VimaTubo - at the base of the structure to drain the collected water. VimaTubo is a polyethylene corrugated and perforated pipe used for superficial and underground water drainage. Available in a wide variety of diameters, with or without geotextile, depending on the degree of protection and filtration that is needed for the drainage and distribution of water.

Non-Woven Fabrics

Vitroplás

Vitroplás are nonwoven fabrics for paintings and isolations, eliminating and preventing cracks, promoting durability, consistency and homogeneity of the coverings. We have it in two versions, one in polyester (PE) with high elasticity and another in fiberglass (VI) with high strength, and in several weights according to the intended application, to satisfy different needs. Vitroplás camouflage is also a simple operation. Its flexibility and structure give a perfect adaptation to the facade and an excellent integration in the coating.

Fiberglass Fabrics

Roving

Roving is a fabric made of fiberglass yarns that combines lightness with a high resistance power. The versatility of this fabric is the answer for a large number of situations that need reinforcement, in different sectors such as construction, transport, water sports, etc. This product is therefore the ideal solution for situations where it is necessary to strengthen without gaining weight.

Waterproof Tapes

VimaFlex

The VimaFlex tapes, produced with high quality materials, reinforce the waterproofing on critical zones, avoiding undesired infiltrations. Frequently, in humid environments, such as bathrooms, swimming pools, balconies and basements, wall and floor expansion joints are the source of serious infiltration problems and, with these simple products, you can avoid severe damages and costly repairs.

Cracks and Wall Coverings

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Non-Woven Fabrics

Vitroplás

Vitroplás are nonwoven fabrics for paintings and isolations, eliminating and preventing cracks, promoting durability, consistency and homogeneity of the coverings. We have it in two versions, one in polyester (PE) with high elasticity and another in fiberglass (VI) with high strength, and in several weights according to the intended application, to satisfy different needs. Vitroplás camouflage is also a simple operation. Its flexibility and structure give a perfect adaptation to the facade and an excellent integration in the coating.

Waterproof Tapes

VimaFlex

The VimaFlex tapes, produced with high quality materials, reinforce the waterproofing on critical zones, avoiding undesired infiltrations. Frequently, in humid environments, such as bathrooms, swimming pools, balconies and basements, wall and floor expansion joints are the source of serious infiltration problems and, with these simple products, you can avoid severe damages and costly repairs.

Non-slip Protection Mat

VIPROTEC

VIPROTEC protection mat is an indispensable accessory in painting and remodeling work. The base of the mat has non-slip PE, giving the product the ability to protect the floor from dust and liquid spillage.

Wall Covering

ADFORS Novelio®

Ensures maximum effectiveness in preventing cracks and a unique finish that gives the space personality and authenticity.


 


Classic Range
Smooth or textured fiberglass for interior wall application and further painting.

SEE HOW TO APPLY: https://www.youtube.com/watch?v=f_uZhNeYvao


 


Nature Range
Fiberglass wall covering already finalized for application on interior walls (does not require painting)


HOW TO APPLY: https://www.youtube.com/watch?v=WgejDXfz-0s


 


Decoration Range
Fiberglass wall covering with high embossed textures made with silica for elegant and decorative effects after finishing with painting


HOW TO APPLY: https://www.youtube.com/watch?v=HseKKCT1LJc


 


Renovation Range
Fiberglass wall covering with textures made with silica for elegant and decorative effects after finishing with painting


 


More information at http://www.adfors.com/eu/brands/novelio

Painting and Interior Decoration

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Non-Woven Fabrics

Vitroplás

Vitroplás are nonwoven fabrics for paintings and isolations, eliminating and preventing cracks, promoting durability, consistency and homogeneity of the coverings. We have it in two versions, one in polyester (PE) with high elasticity and another in fiberglass (VI) with high strength, and in several weights according to the intended application, to satisfy different needs. Vitroplás camouflage is also a simple operation. Its flexibility and structure give a perfect adaptation to the facade and an excellent integration in the coating.

Non-slip Protection Mat

VIPROTEC

VIPROTEC protection mat is an indispensable accessory in painting and remodeling work. The base of the mat has non-slip PE, giving the product the ability to protect the floor from dust and liquid spillage.

Wall Covering

ADFORS Novelio®

Ensures maximum effectiveness in preventing cracks and a unique finish that gives the space personality and authenticity.


 


Classic Range
Smooth or textured fiberglass for interior wall application and further painting.

SEE HOW TO APPLY: https://www.youtube.com/watch?v=f_uZhNeYvao


 


Nature Range
Fiberglass wall covering already finalized for application on interior walls (does not require painting)


HOW TO APPLY: https://www.youtube.com/watch?v=WgejDXfz-0s


 


Decoration Range
Fiberglass wall covering with high embossed textures made with silica for elegant and decorative effects after finishing with painting


HOW TO APPLY: https://www.youtube.com/watch?v=HseKKCT1LJc


 


Renovation Range
Fiberglass wall covering with textures made with silica for elegant and decorative effects after finishing with painting


 


More information at http://www.adfors.com/eu/brands/novelio

ETICS - External Thermal Insulation Composite System

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Profiles for ETICS

VimaPerfil

The profiles are imperative accessories for a safe and complete External Thermal Insulation Composite System (ETICS), since they protect it from mechanical damages, increasing the life of the structure and improving the aesthetic finish of the facades. Our VimaPerfil range is extremely broad and capable of satisfying all kinds of needs.

Mechanical Fastening for ETICS

VimaFix

VimaFix are certified fasteners for the safe installation of Exterior Thermal Insulation Systems (ETICS). They are suitable for any substrate, supporting the weight of the systems, helping them resisting the wind suction force and temperature variations. We offer the guarantee of the best technical parameters, avoiding damages of the insulating material due to hygrothermic factors that over time cause thermal expansion of the panels. The mechanical fastening is mandatory according to ETAG 004.

Hand Tools for ETICS

ViPRO

Our ViPRO hand tools are not only characterized by the beautiful visual impact but also, and more importantly, by the superior quality of the materials used in their construction, setting new standards in the market. The production process is constantly monitored to ensure the best quality. The tools are carefully studied and designed to give maximum comfort, through ergonomic handles, available in two components (with rubber), in plastic or in wood. The steel used is european, guaranteeing strength and durability. We proud ourselves of presenting a product that facilitates the worker's job, reducing his effort and, consequently, increasing productivity. Check our tools catalog below.

Plaster

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Profiles for ETICS

VimaPerfil

The profiles are imperative accessories for a safe and complete External Thermal Insulation Composite System (ETICS), since they protect it from mechanical damages, increasing the life of the structure and improving the aesthetic finish of the facades. Our VimaPerfil range is extremely broad and capable of satisfying all kinds of needs.

Tapes for Plasterboards

VimaTape / VimaCorner / VimaPaper

Our tapes reduce the fragility and the cracking between the plate’s joints, edges and corners of plasterboards and provide better application performance in the gypsum board itself. VimaTape is a self-adhesive fiberglass tape to reinforce joints and cracks. We also have two paper tapes, VimaCorner and VimaPaper, the first being reinforced with two blades of galvanized steel, for protection of corners, and the second being micro perfurated and focused on the reinforcement of corners and joints as well.

GRC - Glassfibre Reinforced Concrete

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Pavements, Beton and Concrete

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Polypropylene Chopped Strands

VimaFiber

VimaFiber are multifilament polypropylene chopped strands to mix with the concrete in order to increase the resistance to the shock and to reduce the cracking in the phase of drying (also phase of plastic deformation). The fibers are putted into the concrete in the mixing process and spread homogeneously throughout the volume, creating an effective reinforcement in all directions.

Fiberglass Chopped Strands

VimaCrack

VimaCrack are fiberglass chopped strands with zirconium oxide, to blend into mortars and concrete mixtures, which provide exceptional chemical resistance, even in alkaline environments. These inorganic and non-combustible fibers, which are not hazardous to health, are ideal for minimizing segregation and avoiding microcracks, increasing hardness and shock resistance, reducing frictional wear.

Marble and Ceramic

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Safety Nets and Fences

Fiberglass Meshes

Viplás®

The Viplás® fiberglass meshes are manufactured with 100% fiberglass yarns in a double-twisting process that increases considerably the tensile strength, an essential factor for wall covering reinforcement. The applied chemical treatment consists of a resin induction, protecting them, with great efficiency, against the existing alkalis in coatings in general and in mineral binder coatings, in particular, considerably increasing their durability. The Viplás® meshes are the only fiberglass meshes approved by LNEC - National Laboratory of Civil Engineering - in Portugal.

Safety Nets and Fabrics

VimaCover

VimaCover is a wide range of shading nets and weed control fabrics designed to protect multiple outdoor spaces. Our shading nets VimaCover R and S are made with a high-density, highly-reinforced polyethylene uniform fabric with durability and tear resistance as main characteristics. Their UV treatment promotes a sublime sunlight protection, ideal to maintain humidity and regulate temperature. They have a lot of applications, being mainly used vertically as screens for covering and horizontally with functions of shading. Our VimaCover T and T NT are garden-oriented fabrics, as they prevent weed growth. Permeable, they allow the free exchange of air and water with the soil, maintaining its humidity and favoring the presence of microorganisms useful for its fertility. At the roots level, these products can maintain a higher temperature in the cold months and decrease the need for watering during hot months. The main functionalities of these products are the projection and maintenance of green areas, where weed control is difficult and visual impact is a key factor.

Foundation and Drainage

Draining Products

VimaDreno / VimaTubo

VimaDreno is a high density polyethylene sheet (HDPE) for drainage with high resistance to pressure, traction and chemical agents. Its alveolar structure gives it an excellent drainage and protection capacity to walls and buried structures, guaranteeing the drainage of the terrain and controlling the condensation. The drainage sheets can be supplied with and without geotextile depending on the filtration and/or separation requirements. It is also available in different sizes to meet the requests of each situation. It is advisable to place a manifold pipe - like our VimaTubo - at the base of the structure to drain the collected water. VimaTubo is a polyethylene corrugated and perforated pipe used for superficial and underground water drainage. Available in a wide variety of diameters, with or without geotextile, depending on the degree of protection and filtration that is needed for the drainage and distribution of water.

Want to know more information about our products?
GET IN TOUCH